|
Max-Air
Technology has established itself as a technical
leader in the valve automation marketplace with
their revolutionary
Thermoplastic Series Actuators. Designed to
withstand the most arduous environments, Max-Air
offer three sizes for all your corrosive environmental
applications covering up to 500 in-lbs of double-acting
torque output.
Double-Acting or Spring-Return
housing are manufactured from a polyamide base material
utilizing high
cycle life spring cartridges made with non-metallic
materials (springs are epoxy coated).
Mechanically held in with
our exclusive patent-pending flange design, pinion
are 100% blowout proof ensuring safe and effective
operation.
All manufactured from
high quality stainless steel.
Standard on all Max-Air
pneumatic actuators, the lower pinion comes standard as a double-square
female output drive according to the ISO 5211 standard. Option
double-d shafts are available upon request.
Upper
drilling for accessories and upper pinion machined
according to NAMUR VDI/VDE 3337 standards.
|
Solenoid valve connection
according to VDI/VDE 3845 made with an insert in alloy
UNI 5076 (ASTM B179) coated with high corrosive resistance
material; air connections are 1/4" GAS (Europe) and
1/4" NPT (United States).
Air (lubricated if possible),
Hydraulic oil or water, minimum of 1 bar pressure (40
psi) and maximum of 8 bar pressure (120 psi).
Standard working temperature
range of -20°C to 80°C (-4°F to 176°F).
All units are serial number
stamped for traceability back to the manufacturing
date, time, and personnel.
All units
are seal tested throughout the cycle of the actuator
on highly sensitive electronic equipment.
|
